Nánari upplýsingar

A Lidar + RGB Solution for Aerial Surveying

The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.

 

Integrates

A Lidar module, an RGB camera, and a high-accuracy IMU

High Efficiency

2 km2 covered in a single flight [1]

High Accuracy

Vertical Accuracy: 5 cm /
Horizontal Accuracy: 10 cm [2]

Point Rate

240,000 pts/s

Returns

Supports 3 Returns [3]

Detection Range

450 m (80% reflectivity, 0 klx)

IP44

Ingress Protection Level

Point Cloud LiveView

Digitize without Compromise

Exceptional Efficiency

Generate true-color point cloud models in real-time, or acquire 2 km2 of point cloud data in a single flight [1] using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor.

Unparalleled Accuracy

Render centimeter-accurate reconstructions thanks to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.

Ready When You Are

The IP44 rating allows the L1 to be operated in rainy or foggy environments. The Lidar module’s active scanning method enables you to fly at night.

Visualize Data as You Fly
Livox Lidar Module

  • Frame Lidar with up to 100% effective point cloud results
  • Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
  • Effective Point Rate: 240,000 pts/s
  • Supports 3 Returns [3]
  • Line Scan Mode and Non-repetitive Scan Mode

Everything in View
RGB Camera

  • 20MP
  • 1-inch CMOS
  • Mechanical Shutter

Accurate Details at Your Disposal
High-accuracy IMU

  • Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)
  • Vision Sensor for Positioning Accuracy
  • GNSS, IMU, RGB Data Fusion

Recreate the World in 3D Point Clouds

Point Cloud LiveView

Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly.
You can also verify fieldwork quality by checking point cloud data immediately after each flight.

Measurement and Annotation

Acquire and communicate critical dimensions on the point cloud model using measurements and annotations.

One-stop Post-processing

DJI Terra fuses the IMU and GNSS data for point cloud and visible light calculations, in addition to conducting POS data calculations so you can effortlessly generate reconstructed models and accuracy reports.

Application Scenarios

Topographic Mapping

Quickly generate topographic maps using accurate digital elevation models.

Learn more

AEC and Surveying

Manage the full project lifecycle using highly accurate point clouds and 3D models.

Learn more

Emergency Response

Any time of the day, gather critical insights in real-time using true-color point clouds.

Learn more

Law Enforcement

Gain situational awareness and forensic intel in real-time to make informed decisions on site.

Learn more

Energy and Infrastructure

Model sparse or complex structures in detail to manage them efficiently and safely.

Learn more

Agriculture and Forestry Management

Gain insight into vegetation density, area, stock volume, canopy width, and growth trends.

Learn more

Footnotes

  1. Over 30 minutes, at a speed of 10m/s, a flight altitude of 100 m, with a side overlap rate of 20%, point cloud density > 200 points/m2.
  2. Flight altitude: 50 m
  3. In operations with two or three returns, the point rate is 480,000 pts/s

Zenmuse L1

Instant Clarity. Superior Accuracy.

The L1 will be available for order in early 2021.

Nánari upplýsingar

A Lidar + RGB Solution for Aerial Surveying

The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.

 

Integrates

A Lidar module, an RGB camera, and a high-accuracy IMU

High Efficiency

2 km2 covered in a single flight [1]

High Accuracy

Vertical Accuracy: 5 cm /
Horizontal Accuracy: 10 cm [2]

Point Rate

240,000 pts/s

Returns

Supports 3 Returns [3]

Detection Range

450 m (80% reflectivity, 0 klx)

IP44

Ingress Protection Level

Point Cloud LiveView

Digitize without Compromise

Exceptional Efficiency

Generate true-color point cloud models in real-time, or acquire 2 km2 of point cloud data in a single flight [1] using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor.

Unparalleled Accuracy

Render centimeter-accurate reconstructions thanks to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.

Ready When You Are

The IP44 rating allows the L1 to be operated in rainy or foggy environments. The Lidar module’s active scanning method enables you to fly at night.

Visualize Data as You Fly
Livox Lidar Module

  • Frame Lidar with up to 100% effective point cloud results
  • Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
  • Effective Point Rate: 240,000 pts/s
  • Supports 3 Returns [3]
  • Line Scan Mode and Non-repetitive Scan Mode

Everything in View
RGB Camera

  • 20MP
  • 1-inch CMOS
  • Mechanical Shutter

Accurate Details at Your Disposal
High-accuracy IMU

  • Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)
  • Vision Sensor for Positioning Accuracy
  • GNSS, IMU, RGB Data Fusion

Recreate the World in 3D Point Clouds

Point Cloud LiveView

Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly.
You can also verify fieldwork quality by checking point cloud data immediately after each flight.

Measurement and Annotation

Acquire and communicate critical dimensions on the point cloud model using measurements and annotations.

One-stop Post-processing

DJI Terra fuses the IMU and GNSS data for point cloud and visible light calculations, in addition to conducting POS data calculations so you can effortlessly generate reconstructed models and accuracy reports.

Application Scenarios

Topographic Mapping

Quickly generate topographic maps using accurate digital elevation models.

Learn more

AEC and Surveying

Manage the full project lifecycle using highly accurate point clouds and 3D models.

Learn more

Emergency Response

Any time of the day, gather critical insights in real-time using true-color point clouds.

Learn more

Law Enforcement

Gain situational awareness and forensic intel in real-time to make informed decisions on site.

Learn more

Energy and Infrastructure

Model sparse or complex structures in detail to manage them efficiently and safely.

Learn more

Agriculture and Forestry Management

Gain insight into vegetation density, area, stock volume, canopy width, and growth trends.

Learn more

Footnotes

  1. Over 30 minutes, at a speed of 10m/s, a flight altitude of 100 m, with a side overlap rate of 20%, point cloud density > 200 points/m2.
  2. Flight altitude: 50 m
  3. In operations with two or three returns, the point rate is 480,000 pts/s
Scroll to Top